Administer Categories

The Administer Categories page allows you to establish categories that describe the types of assignments you will use in the selected semester and course section. An initial set of categories, defined by the campus, is set at the beginning of the year. If you have an assignment that falls under a category that is not included in the list, you can create a new category, if allowed by the campus. The category you create is added to the master list and will be available for all teachers to use. The list of categories will continue to grow as you and the other teachers add categories.

For your selected categories, you must specify the type of weighting to use for calculating averages (e.g., percent-based, point-based, or multiplier-based). You can also assign your own category colors to enable color-coding of assignments on the Assignment Grades page.

From this page, you can also copy categories from one course to other course sections.

Notes for mobile device users:

The drag-and-drop functionality is not available for mobile devices. Instead, click a category under Available Categories to send it to the Selected Categories list.
If the list of categories under Available Categories exceeds one screen, you can view the additional categories by using two fingers to scroll through the categories.

To set up categories:

From the Settings menu, select Administer Categories.

The Administer Categories page is displayed allowing you to establish categories for a selected semester and course section.

In the Semester field, click to select the semester for which you want to set up categories.
In the Course Section field, click to select the course section for which you want to set up categories.

The available categories are listed under Available Categories, and your current category list for the selected course section is displayed under Selected Categories.

Under Weighting Type, click to select the weighting type you want to use for the categories. You must use the same weighting type for all cycles in a semester.

Percentage - If you select percent-based weighting, you will assign percentages to each category. The percentages must total 100%.

Point - If you select point-based weighting, you will provide point values for each category. The point values must equal the total number of points for the cycle. When using point-based weighting, the categories are only used for grouping similar assignments. The calculation is based on the total points, not weighting.

Multiplier - If you select multiplier-based weighting, you will provide a multiplier number (between 1-9) for each category. For multipliers greater than one, the individual assignment grades are counted multiple times. Multiplier-based weighting is often used in elementary schools.

See the Calculate Averages page for an explanation of calculating averages for each weighting type.

Notes:

If you change the weighting type after categories have been entered below, a message is displayed to notify you that all entered values for the categories will be cleared if you change the weighting type. Click OK to change the weighting type, or click Cancel to cancel the action.
You cannot change the weighting type if you have entered assignment grades for any category.
You cannot change the weighting type for the second semester of a two-semester course. The weighting type must be the same for all semesters of a course.
If you post an override cycle grade for a student even if there are no categories for the course, the weighting type is automatically set to percentage.

Under Available Categories, the available categories are listed in alphabetical order.
To add a new category to the list of available categories, click Add new category type. The Add Category section is displayed below the available categories. If the campus disallows teachers from adding categories, the Add new category type button is disabled, and you cannot add new categories; you must use the categories established by the campus.

In the Category Name field, type the name of the new category. You cannot type a name that is already included in the list of available categories. Please type carefully to avoid spelling errors.

Category names are not case-sensitive (e.g., if quiz already appears in the list, you cannot add Quiz).

In the PIN field, type your four-digit PIN.
Click Add. The new category is displayed in the list of available categories in alphabetical order. You can then double-click it or drag it to your category list.

If you type your PIN incorrectly, the system notifies you that you provided an invalid PIN. You must provide the correct PIN before you can continue.

To close the Add Category section without adding a new category, click Cancel.
Once a category is added to the list of available categories, it cannot be deleted from the list. If you add a category by mistake, you must contact your campus administrator to have it removed at the campus level. The category cannot be removed if it has assignments associated with it.

Under Selected Categories, all categories for the selected course section are displayed for all valid cycles in the semester.
To add one of the available categories to your category list, click on the available category and drag it to your category list. Or, double-click the available category. The category is displayed at the bottom of your category list. If there is a default or locked weight, it is copied to the open cycles.
To remove a category from your category list, click beside that category in the Delete column.

Note: You cannot delete a category that has assignments associated with it. The is not displayed for those categories.

If a cycle is closed, the column heading for the cycle displays (closed), and the data cannot be changed.

Under Selected Categories, the table changes according to your selection in the Weighting Type field. For each cycle, the column heading is % Weight, Points, or Multiplier, according to your selection. For each category you add to your list, enter the appropriate values.

If you select Percentage for weighting type, the percentages must total 100%.
If you select a category created at the campus level, and the campus entered a weight for that category, the weight is displayed in the % Weight field for the category. You can change the weight, unless the campus locked the weight for the category. If the weight is locked, the weight is displayed in the field and cannot be changed.
If you select Point for weighting type, you cannot enter the total point values in the Points field. The field automatically displays the sum of the total points entered for all assignments for the category. For example, on the Administer Assignments page, if you enter five quizzes in the Quiz category, each with total points set to 100, the field displays 500.
If you select Multiplier for weighting type, you must enter a value between 1-9 for the Multiplier field.

Under Selected Categories in the Color column, click to select a color for the category. The color is used to color-code assignments on the Assignment Grades page. By default, no color is assigned to the category. The color can be changed any time.
Under Selected Categories in the # Drop column for each cycle, type the number of items to be dropped during a cycle. For example, you may want to drop the student's three lowest grades from the homework category. The student's category average will always reflect the dropped grades.

Warning: If all assignments in the category do not have the same total points value (as entered on the Administer Assignments page), the calculations for dropping a specified number of assignments for the category may result in an average that is different than expected. If the total points value varies, the grade with the lowest number of points may not necessarily be the lowest grade.

Only non-excluded grades are dropped. If you exclude an assignment for a student on the Assignment Grades page, the assignment is not counted as one of the grades that will be dropped.

If you do not want to drop any grades from the category, type 0.

After you enter the weighting type value and number of assignments to drop for cycle 1, you can click to copy the values to cycles 2 and 3.

To save your categories:

Before you leave the page, you must save your changes.

In the PIN field, type your four-digit PIN. The field is disabled for inquiry-only users.
Click Save.
If your changes were saved successfully, the page reloads with a message indicating that the categories were saved successfully.
If you typed your PIN incorrectly, the system notifies you that you provided an invalid PIN. You must provide the correct PIN to continue.
If the cycle is closed, you cannot save any changes. The button is disabled; the button says All Cycles Closed. If you attempt to make changes, a warning message notifies you that changes were not saved.

If you change any data on the page and then attempt to leave the page without saving the changes, a warning message is displayed. This includes attempting to change the Semester or Course Section fields before you save changes.
Click Continue to leave the page without saving your changes.
Click Cancel to return to the page and save your changes.

To copy categories to another course section:

Once you save the categories for a course, you can copy the categories to another course section.

Use the Semester and Course Section fields to select the course section from which you want to copy categories.
Click Copy categories to other course sections. The Copy Categories page is displayed. Review the Help for the Copy Categories page for additional instructions on copying categories.